TM 5-3810-231-12
The crane is powered by a Cummins Model NT-380-
4. Identification and Tabulated Data
1 diesel engine. It is a single engine machine with the
engine mounted on the revolving frame and used to
a. Identification. The Model 1125 60 to n crawler
power and operate all functions of the revolving frame
crane has seven major identification plates.
The
and boom equipment and to furnish power to propel the
information contained on these plates is listed below.
unit through the lower (crawler) section.
(1) Fuel tank capacity plate. This plate is
In this manual, the terms left and right are used with
located outside on the right side of the
respect to the operator's side as the right side. Front is
cab just below the fuel filter cap and
the end of the crane to which the boom is mounted.
shows the fuel tank capacity in U.S.
Rear is the end of the crane upper which contains the
gallons.
engine and counterweight.
(2) Control levers instruction plate. This plate
is located in the operator's cab, on the
lower panel, directly in front
Figure 2. Crane, right-rear, three-quarter view, with shipping dimensions.
5
