TM 5-3810-287-24P
H-
d. PART NUMBER (Column (4)). Indicates the
General support is the lowest level that can do
complete repair of the item.
primary number used by the manufacturer (individual,
L-
Specialized repair activity is the lowest level that
company, firm, corporation, or Government activity),
which controls the design and characteristics of the item
can do complete repair of the item.
D-
by means of its engineering drawings, specifications
Depot is the lowest level that can do complete
standards, and inspection requirements to identify an
repair of the item.
item or range of items.
Z-
Non reparable. No repair is authorized.
B-
No repair is authorized. (No parts or special
tools are authorized for the maintenance of a
NOTE: When you use an NSN to requisition an item,
"B"-coded item.) However, the item may be
the item you receive may have a different part
reconditioned by adjusting, lubricating, etc., at
number from the part ordered.
the user level.
e. DESCRIPTION AND USABLE ON CODE (UOC)
(3) Recoverability Code. Recoverability codes
(Column (5)).
This column includes the following
are assigned to items to indicate the disposition action
information:
on unserviceable items. The recoverability code is
(1) The Federal item name and, when
entered in the fifth position of the SMR code as follows:
required, a minimum description to identify the item.
(2) Physical security classification.
Not
Code
Application/Explanation
Applicable.
Z-
Non reparable item. When unserviceable,
(3) Items that are included in kits and sets are
condemn and dispose of the item at the level of
listed below the name of the kit or set on Figure KIT.
maintenance
shown in the 3d position of the
(4) Spare/repair parts that make up an
SMR code.
assembled item are listed immediately following the
O-
Reparable item. When uneconomically
assembled item line entry.
reparable, condemn and dispose of the item at
(5) Part numbers for bulk materials are
unit maintenance or aviation unit level.
referenced in this column in the line item entry for the
F-
Reparable item. When uneconomically
item to be manufactured/fabricated.
reparable, condemn and dispose of the item at
(6) When the item is not used with all serial
the direct support or aviation intermediate level.
numbers of the same model, the effective serial numbers
H-
Reparable item. When uneconomically
are shown on the last line(s) of the description (before
reparable, condemn and dispose of the item at
UOC). Not Applicable.
the general support level.
(7) The usable on code, when applicable (see
D-
Reparable item. When beyond lower level repair
paragraph 5, Special Information).
capability, return to depot. Condemnation and
(8) In the Special Tools List section, the basis
disposal of
item not authorized below depot
of issue (BOI) appears as the last line(s) in the entry for
level.
each special tool, special TMDE, and other special
L-
Reparable item. Condemnation and disposal of
support equipment.
When density of equipment's
item not authorized below specialized repair
supported exceeds density spread indicated in the basis
activity (SRA).
of issue, the total authorization is increased
A-
Item requires special handling or condemnation
proportionately.
procedures because of specific reasons (e.g.,
(9) The statement "END OF FIGURE" appears
precious metal content, high dollar value, critical
just below the last item description in Column 5 for a
material, or hazardous material). Refer to
given figure in both Section II and Section III.
appropriate manuals/directives for specific
f. QTY (Column (6)). The QTY (quantity per figure
instructions.
column) indicates the quantity of the item used in the
breakout shown on the illustration/figure, which is
c. CAGEC (Column (3)). The Commercial and
prepared for a functional group, sub functional group, or
Government Entity (CAGE) Code (C) is a 5-digit
an assembly. A "V" appearing in this column in lieu of a
alphanumeric code which Is used to Identify the
quantity indicates that the quantity is variable and the
manufacturer, distributor, or Government agency, etc.,
quantity may vary from application to application.
that supplies the item.
4.
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER column. This column
lists the NSN by National Item Identification Number
(NIIN)
3
