Tabulated Data-CONT.

Tabulated Data - TM-5-3810-288-120026

TM-5-3810-288-12 Crane Shovel Truck Mounted 20 Ton 3/4 Cu. Yd. G.E.D. 6x6 Manual
Page Navigation
12

TM 5-3810-288-12

Front drum line speed, lowering---------------------------------------------------------------------- 92.4 feet per minute

Boom hoist drum shaft --------------------------------------------------------------------------------- 96.8 rpm

Boom hoist drum shaft, lowering . ------------------------------------------------------------------- 45.8 rpm

Boom hoist drum line speed, lowering -------------------------------------------------------------- 112.5 feet per minute

Revolving frame rotation ------------------------------------------------------------------------------ 4.06 rpm

(7) Rated capacites.

Crane ---------------------------------------------------------------------------------------------------- 20 tons

(rating plate, fig.19)

Clamshell -------------------------------------------------------------------------------------------------- cubic yard

Dragline ---------------------------------------------------------------------------------------------------- cubic yard

Backhoe---------------------------------------------------------------------------------------------------- cubic yard

Shovel ---------------------------------------------------------------------------------------------------- 3/4cubic yard

Rear drum line pull, sea level ------------------------------------------------------------------------ 15,900 pounds

Rear drum line pull, 5000 feet altitude ------------------------------------------------------------- 12,550 pounds

Front drum line pull, sea level------------------------------------------------------------------------- 15,400 pounds

Front drum line pull, 5000 feet altitude ------------------------------------------------------------- 12,200 pounds

Boom hoist drum line pull ------------------------------------------------------------------------------ 7,000 pounds

(8) Fuel, water, oil and grease capacities, carrier.

Engine fuel tank ------------------------------------------------------------------------------------------ 75 gallons

Cooling system ------------------------------------------------------------------------------------------- 15 gallons

Crankcase ------------------------------------------------------------------------------------------------- 28 quarts

Transmission --------------------------------------------------------------------------------------------- 8 quarts

Drop box -------------------------------------------------------------------------------------------------- 4 quarts

Transfer case --------------------------------------------------------------------------------------------- 81/2 pints

Front axle -------------------------------------------------------------------------------------------------- 11 quarts

Front rear axle -------------------------------------------------------------------------------------------- 111/2 quarts

Rear rear axle -------------------------------------------------------------------------------------------- 11 quarts

Steering gear and tank --------------------------------------------------------------------------------- 7 pints

(9) Crane fuel, Iater, and oil capacities.

Engine fuel tank ------------------------------------------------------------------------------------------ 50 gallons

Cooling system ------------------------------------------------------------------------------------------- 9 gallons

Crankcase ------------------------------------------------------------------------------------------------- 16 quarts

Transmission --------------------------------------------------------------------------------------------- . 9 pints

Gear and chain case ------------------------------------------------------------------------------------ 18 gallons

Hydraulic system reservoir ---------------------------------------------------------------------------- 3quarts

(10) Crane lifting capacities. Refer to figure 1-9

1-5. Differences in Models

for crane lifting capacities.

There are no differences in the Harnischfeger Model

(11) Crane working ranges. See figure 1-10 for

M320T truck crane in the serial number range E-31301

crane working ranges.

through E-31511 inclusive. The serial numbers listed

(12) Clamshell working ranges . See figure 1-11

below were furnished under a previous contract and are

for damshell working ranges.

also identical machines.

(13) Dragline working ranges. See figure 1-12

for dragline working ranges.

E-29165 through 29260 inclusive

(14) Backhoe working ranges. See figure 1-13

E-29446 through 29469 inclusive

E-29870

for backhoe working ranges.

(15) Cable specifications. Refer to table 1-1 for

E-30020 through 30022

E-30032 through 30034 inclusive

cable lengths for each of the frontend attachments.

E-30128 through 30225 inclusive

(16) Bridge weight clasification.

The bridge

E-30237 through 30239 inclusive

weight classification is E29.

E-30328 through 30331 inclusive

(17) Crane wiring diagram. Refer to figure 1-14.

(18) Carrier wiring diagram. Refer to figure 1-9.

(19) Hydraulic schematic. Refer to figure 1-15.

1-12

Privacy Statement
Press Release
Contact