TM 5-3810-288-12
STEP 1.
LOWER LOAD ON FRONT OR REAR DRUM LINE TO GROUND.
STEP 2.
REMOVE ADJUSTING NUT AND ADJUSTING BOLT.
STEP 3.
REMOVE COTTER PIN AND UPPER BRAKE BAND PIN. THESE PINS ARE REACHED FROM BEHIND REAR DRUM. REMOVE UPPER BRAKE BAND.
STEP 4.
REFER TO FIGURE 3-70 AND REMOVE LOWER BRAKE BAND COTTER PIN AND PIN THROUGH HAND HOLE.
STEP 5.
REMOVE SPRING ADJUSTING NUT AND JAM NUT. SLIDE LOWER BRAKE BAND AROUND DRUM AND REMOVE LOWER B RAKE BAND.
STEP 6.
REMOVE FRONT DRUM BRAKE BAND IN SAME MANNER.
Figure 3-86. Rear drumshaft brake band, removal and replacement.
3-102
