TM 5-3810-288-12
STEP 1.
REMOVE CAPSCREWS AND LOCKWASHERS (2 PER ROLLER). REMOVE LOCKPLATE.
STEP 2.
PLACE WRENCH ON HEXAGONAL END OF ECCENTRIC PIN AND TURN PIN IN EITHER DIRECTION
UNTIL THERE IS NO GAP BETWEEN ROLLER AND ROLLER PATH AT THE POINT SHOWN.
STEP 3.
TURN ECCENTRIC PIN UNTIL THERE IS SOME GAP, BUT LESS THAN 1/16 INCH, BETWEEN ROLLER
AND ROLLER PATH. MEASURE WITH FEELER GAGE.
STEP 4.
INSTALL CAPSCREWS, LOCKWASHERS, AND LOCKPLATE.
ME 3810-288-12/3-97
Figure 3-97. Hook roller adjustment.
3-114
