1. Scope.
This RPSTL lists and authorizes spares and repair
parts; special tools; special test, measurement, and
diagnostic equipment (TMDE); and other special
support equipment required for performance of Unit,
Intermediate Direct Support and Intermediate General
Support Maintenance of the Crane, Truck Mounted. It
authorizes the requisitioning, issue, and disposition of
spares, repair parts and special tools as indicated by
the
source,
maintenance
and
recoverability
(SMR)codes.
2. General.
In addition to Section I. Introduction, this Repair Parts
and Special Tools List is divided into the following
sections:a. Section II. Repair Parts List. A list of spares
and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes
parts which must be removed for replacement of the
authorized parts. Parts lists are composed of functional
groups in ascending alphanumeric sequence, with the
parts in each group listed in ascending figure and item
number sequence. Bulk materials are listed in item
name sequence. Repair kits are listed separately in
their own functional group within Section II. Repair parts
for repairable special tools are also listed in the section.
Items
listed
are
shown
on
the
associated
illustration(s)/figure(s).b. Section Ill. Special Tools List.
A list of special tools, special TMDE, and other special
support equipment authorized by this RPSTL (as
indicated by Basis of Issue (BOI) information in
DESCRIPTIONAND USABLE ON CODE column) for
the performance of maintenance. Not applicable. c.
Cross-reference Indexes. A list, in National Item
Identification Number (NIIN) sequence, of all National
stock numbered items appearing in the listing, followed
by a list in alphanumeric sequence of all part numbers
appearing; in the listings. National stock numbers and
part numbers are cross-referenced to each illustration
figure and item number appearance. The figure and
item number index lists figure and item numbers in
alphanumeric
sequence
and
cross-references
NSN,FSCM, and part numbers.
3. Explanation of Columns (Sections II and III).a.
ITEM NO. (Column (1)). Indicates the number used to
identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source,
Maintenance, and Recoverability (SMR) code is
a5-position
code
containing
supply/requisitioning information, maintenance
category authorization criteria, and disposition
instructions, as shown in the following breakout:
Complete
Repair:
Maintenance
capacity,
capability, and authority to perform all corrective
maintenance tasks of the "Repair" function in a
use/user
environment
in
order
to
restore
serviceability to a failed item.
(1) Source Code. The source code tells you
how to get an item needed for maintenance,
repair, or overhaul of an end item/equipment.
Explanations of source codes follows:
Source Code
1st two positions
XXxxx
How you get an item
Maintenance Code
I
xxXXx
3d position
4th position
Who can install,
Who can
replace or use
do complete
the item
repair* on the item
Recoverability Code
I
xxxxx
5th position
Who determines disposition action on
an unserviceable item
1
Section I
TM 5-3810-294-20P
UNIT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I. INTRODUCTION