TM 5-3810-295-34
release control valve.
stall plunger in valve body (16).
(b) Install spring (14), valve (12), washer
18-24. Drain Valve Assembly
(11) and nut (10) on plunger (13).
(c) Install new packing (9) on valve
a. Removal and Dlsassembly.
cover (6) and place cover on valve body
(1) Refer to figure 18-1 and remove the
(16). Secure with lockwashers (8) and
drain valve assembly as instructed.
screws (7).
(2) Refer to figure 18-14 and disassemble
(d) Install marker tag (17) with
the drain valve as follows:
lockwasher (8) and screw (7).
(a) Remove loop clamp (1) from dust boot
(e) Install pipe plug (5) and instruction
(2) and remove boot from valve assembly.
plate (4) to valve body (16).
(b) Remove nut (3) from valve plunger (9)
(f) Install nut (3) and knob (2) and
and remove nut (4) from valve body (11).
secure knob with pin (1).
(c) Remove valve (5) from plunger (9) and
(2) Refer to TM 5-3810-295-12 and install
park
18-22
