DON'T FORGET.
LOAD CHARTS REPRESENT THE ABSOLUTE MAXIMUM ALLOWABLE LOADS WHICH ARE
USUALLY BASED ON EITHER 85% OF TIPPING OR STRUCTURAL LIMITATIONS UNDER
SPECIFIC CONDITIONS. UNLESS THE PRECISE RADIUS OF OPERATION, BOOM LENGTH
AND ANGLE IS KNOWN, ROUTINE PLANNING AND OPERATION SHOULD REMAIN WELL
BELOW THESE CAPACITY FIGURES.
DON'T FORGET.
OVER-THE-SIDE LIFTING CAPACITIES APPLY WHEN THE LOAD IS MOVED FROM OVER-
THE-REAR TO BEYOND THE CENTERLINE OF THE FRONT AND REAR TIRES WHEN
LIFTING ON RUBBER, OR BEYOND THE CENTERLINE OF THE FRONT AND REAR
OUTRIGGERS WHEN OPERATING ON OUTRIGGERS.
30
