TM 5-3810-300-24&P-3
2.0
SUGGESTED REMEDY
1.
Replace the needle valve and spray tip assembly.
6. Remove the carbon in the spray tip with tip reamer
2.
Replace the needle valve and spray tip assembly.
J 9464 which is especially designed and ground for this
3.
Replace the spring seat.
purpose.
4.
Replace the valve spring.
7. Check the size of the spray tip orifices. Then, using
5.
Disassemble the injector and clean all of the parts.
tool J 4298-1 with the proper size wire, clean the orifices.
Page 234