TM 5-3810-300-24&P-3
15.2 Trouble Shooting (Engine)
SUGGESTED REMEDY
1
Check the compression pressure and, if only one
5
Replace the blower-to-block gasket.
cylinder has low compression, remove the cylinder head
6
Replace the end plate gasket.
and replace the head gaskets.
7
Check the exhaust back pressure and repair or
2
Inspect the piston and liner and replace damaged
replace the muffler if an obstruction is found.
parts.
8
Check the exhaust back pressure and install larger
3
Install new piston rings.
piping if it is determined that the piping is too small, too
4
Clean and repair or replace the breather assembly.
long or has too many bends
Page 438