TM 5-3810-302-10
13. Swing Gearbox.
Lube Type - MPL
Lube Interval -
Check every 50 hours or weekly
Drain 1st time after 250 hours and every 500 hours or 12
months thereafter
Lube Amount -1 pint (.5 L)
Application - Fill to check plug
14. Swing Gear and Pinion,
Lube Type - MPG
Lube Interval -10 hours or daily
Lube Amount - Coat all teeth
Application - Brush on
15. Swing Bearing.
Lube Type - MPG
Lube Interval -50 hours
Lube Amount - Until grease extrudes from the whole circum-
ference of the bearing
Application -1 grease fitting
16/17. Lift Cylinder.
NOTE
When greasing the lift cylinder pivot shafts,
better distribution of grease within the shaft
bearings is obtained if the weight of the
boom is removed from the shafts.
Lube Type - MPG
Lube Interval - 10 hours
Lube Amount - Until grease extrudes
Application -2 fittings at top bushing and 2 on the bottom bearing
blocks
6-8
