T M 5 - 3 8 1 0 - 3 0 5 - 1 0
Lower the LRT 110 Crane Off the
2.
Outriggers
3.
Never disconnect hydraulic lines
or fittings before venting pres-
4.
sure. Turn dipstick cap 1/4 turn
to safety notch to relieve pres-
sure. Failure to follow this
procedure could cause SERIOUS
INJURY.
5.
1. Turn dipstick 1/4 turn to safety notch to
relieve pressure.
Remove reducer -6 to -4 and cap -4 from
connector tee on pressure hose (Figure 4-56).
Remove single return hose and adapter from
tee and connect connector tee to tee.
Use reducer -6 to -4 and cap -4 to cap adapter
on single return hose removed from tee in
step 3.
Remove appropriate extend hose from outrig-
ger solenoid.
Figure 4-56. Lowering the LRT Crane off the Outriggers
4-61
