TM 5-3810-306-10LOAD CHART (Cont’d)Maximum Permissible Boom Lengths:(a) 34 ft.(d) 50 ft.(b) 40 ft.(e) 55 ft.(c) 45 ft.(f) 60 ft.No Load Stability DataMain Boom60 ft.FrontMin. boom angle (deg.) for indicated length0(No load)Max. boom length (ft.) at 0 deg. boom angle60360 Deg.Min. boom angle (deg.) for indicated length0(No load)Max. boom length (ft.) at 0 deg. boom angle601.Capacities are in pounds and do not exceed 75% of tipping loads as determined by test in accordance with SAE J765OCT80.2.Capacities are applicable to machines equipped with 29.5 x 25 (28 PR) bias ply tires, at 75 psi cold inflation pressure.3.Defined Arc - Over front includes 6’ on either side of longitudinal centerline of machine.4.Capacities are applicable only with machine on firm level surface.5.Rear axle lockout valve must be functioning properly before lifting on rubber. Refer to TM5-3810-306-20.6.All rubber lifting depends on proper tire inflation and condition. Capacities must be reduced for lower tire inflationpressures. Damaged tires are hazardous to safe operation of crane.7.For pick and carry operation, boom must be centered over front of machine, mechanical swing lock engaged and loadrestrained from swinging. when handling loads in the structural range with capacities close to maximum ratings, travelmust be reduced to creep speeds.8.Creep-not over 200 ft. of movement in any 30 min. period and not exceeding 1 mph.F-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
