TM 5-3810-307-10
Table 5-1. Operator Preventive Maintenance Checks and Services - Continued
ITEM
ITEM TO BE
NOT FULLY
NO.
INTERVAL
CHECKED OR
PROCEDURE
MISSION
SERVICED
CAPABLE IF
a. Refer to
29
BEFORE
Wire Rope
a. Inspect wire rope,
paragraph 2-4 for
rope sockets, and
wire rope safety
fittings for damage,
criteria. If in
wear, corrosion, heat
doubt, contact
damage, and lack of
maintenance.
lubrication on rope.
Check for kinks and
exposed/ broken wire
strands. Ensure that
all components are
properly reeved and
secure.
b. Any component
b. Inspect sheave
damaged and/or
guards, guides,
corroded to the
drums, flanges, and
extent of inflicting
other surfaces that
damage to the
come in contact with
wire rope.
wire rope for sharp
edges, burrs, and
corrosion that could
damage wire rope.
Engine oil level at or
30
BEFORE
Engine
Check engine crankcase
below cross-hatched
oil level. Maintain oil level
area on dipstick.
within cross-hatched area
Class III leak exists.
on dipstick (between
arrows).
31
(Text Deleted)
5-36 Change 1
