TM 5-3810-307-10
Table H-7. Components of End Item - Berminghammer Pile Driver System (Continued)
Item
No.
Qty.
Component Description
Rigging and Safety Equipment (Continued)
41
2
1-inch shackle
40
2
7/8-inch shackle NOTE: may be attached to impact hammer
39
8
3/4-inch shackle
38
2
Ground-release shackle
44
1
Temporary hydraulic hose retainer chain (5/16 x 84-inch (0.8 x 213 cm))
11
1
Lead transportation chain
46
1
Hydraulic hose clamp (with attaching hardware two bolts)
45
1
Pulley with 15-inch (38 cm) anchor bungee
26
4
4x4-inch (10 x 10 cm) wood block
47
2
1/2 x 48-inch wire rope
48
4
5/8 x 96-inch wire rope to attach the pile adapters to the impact hammer.
49
8
5/8-inch cable clamps to attach the pile adapters to the impact hammer.
50
1
Piston lifting eyebolt
Shipping/Storage Equipment (NOTE: May be on Impact Hammer)
51
2
Intake/exhaust port weather cap
52
1
Catch ring weather cap
53
2
Catch ring weather cap securing strap
54
1
Piston transportation pin and clip
55
1
Piston transportation pin clip
56
1
Trip transport bolt
Ground Servicing Equipment
57
1
Ground fueling hand pump with hose and quick connect fitting
59
1
Ground oiling hand pump
58
1
Ground oiling hose and quick connect fitting
60
1
Ground oiling hand pump container cover
61
1
Waste fuel drip tank drain hose and quick connect fitting
62
1
Grease gun with flex hose
63
1
Coupler for grease gun
64
1
Oil gun
Tools
65
1
Hex key 3/4-inch (12-inch long)
66
1
Hex key 5/8-inch (10-inch long)
67
1
Hex key 1/2-inch (8-inch long)
68
1
Hex key 3/8-inch (7-inch long)
69
1
Hex key 5/16-inch (6-inch long)
70
1
Wood pile tongs
71
1
Crowbar (2-foot (61 cm))
72
1
Two-pound (0.9 kg) hammer
73
1
Vice grips
74
1
12-inch (30.5 cm) adjustable wrench
75
1
18-inch (46 cm) adjustable wrench
77
1
1-5/16-inch combination wrench
76
1
1-1/8-inch combination wrench
78
1
1-5/16-inch box end wrench
79
1
1-1/8-inch box end wrench
80
1
Two-inch (5 cm) wood level
81
1
100-foot (30.5 m) fiberglass measuring tape
82
1
Check valve extractor tool
83
1
Ring compressor
84
1
Piston ring pliers
Change 1 H-91
