TM 5-3810-307-24-1-1
(8)
APPENDIX H. Instructions for Installation/Operation of Pile Driver System
(Berminghammer),
(9)
APPENDIX I.
Determination of ATEC Weight Distribution,
(10)
APPENDIX J.
Transportability Guidance,
(11)
APPENDIX K.
Winterizing the ATEC Crane,
(12)
APPENDIX L.
Instructions for Installation/Operation of Pile Driver (Linkbelt),
(13)
APPENDIX M.
Lubrication,
(14)
Alphabetical Index.
TM 5-3810-307-24-1 - Maintenance Manual with Supplemental Data. This manual consists of two
volumes: Volume one is the basic service manual and Volume two is the Service Maintenance (SM)
packages.
Volume one, the service manual, is divided into chapters and sections. Chapter One contains 5
sections that cover: general maintenance information; preventive maintenance; lubrication; and
troubleshooting.
Chapter Two, divided into 16 sections, covers specific vehicle component
removal/replacement procedures. At the beginning of each section is a Table of Contents listing the
specific system/components contained in the section. Where vehicle components are repairable, the
replacement procedure may refer to an SM package for repair. Volume One also contains the
Maintenance Allocation Chart (MAC) as Appendix A.
Volume Two, the SM packages, contains repair procedures for selected components of the
vehicle. Each SM package is complete with its own Table of Contents. Any requirements for tools and
materials to perform each repair task are also listed. Volume Two also includes Appendices consisting of
vendor repair data for components not addressed elsewhere in the manual and instructions for winterizing
the ATEC (AT422T).
TM 5-3810-307-24-2 - Diesel Engine Operation and Maintenance Manual. This manual also consists of
two volumes: Volume one is the Cummins operation and maintenance handbook while volume two
contains engine repair information. Each manual has been edited specifically for the ATEC. Included are
preventive maintenance, troubleshooting, adjustment/repair/replacement specifications/torques values,
and warranty data.
TM 5-3810-307-24P Repair Parts and Special Tools List (RPSTL). Contains a complete illustrated
parts breakdown for the ATEC. Also included are:
(1)
Introduction Work Package,
(2)
Repair Parts List Work Package,
(3)
Special Tools Work Package,
(4)
Cross-Reference Index Work Packages.
viii C-1
