TM 5-3810-307-24-1-1
SEAT ASSEMBLY (CARRIER CAB)
Removal
a.
Remove nuts (10, Figure 2-1-1), lockwashers (11), and capscrews (12) securing anchor belts (14) and
shoulder harness (13) to pivot links (21) on sides of seat (25).
b.
Remove locknuts (23), washers (24), seat (25), cone washers (26), and support plates (27) from cab.
c.
If necessary, remove nut (15), lockwasher (16), cap (17), capscrew (18), washers (19), fiber washer (20),
pivot link (21), and latch belt (22) from right side of seat.
Installation
a.
If removed, secure latch belt (22, Figure 2-1-1) and pivot link (21) to right side of seat with fiber washer
(20), washers (19), capscrew (18), lockwasher (16), nut (15), and cap (17).
b.
Position support plates (27) and cone washers (26) on cab floor.
c.
Position seat (25) on cone washers (26) and secure with washers (24) and locknuts (23).
d.
Secure shoulder harness (13) and anchor belts (14) to pivot links (21) on sides of seat with capscrews
(12), lockwashers (11), and nuts (10).
2-1-11
