TM 5-3810-307-24-1-1
MAINTENANCE
5.
Remove the filter bowl from the filter head and
HYDRAULIC FILTER.
remove the element.
Removal and Disassembly.
6.
Discard the used element.
WARNING
Assembly and Installation.
Ensure that all hydraulic systems are
1.
Install a new element into the filter bowl and
shut down and the pressure is relieved.
install the filter bowl into the filter head, refer to
1.
Shut down all hydraulic systems.
2.
Using a new gasket, install the filter and gasket
2.
Thoroughly clean the area around the filter.
onto the hydraulic reservoir.
Wipe any dirt from the filter housing and filter head.
3.
Secure the filter in place with the mounting
3.
Disconnect the hydraulic line from the filter
bolts.
head, refer to Figure 2-8-5.
4.
Connect the hydraulic line to the filter head.
4.
Remove the four bolts securing the filter to the
reservoir and remove the filter and gasket.
5.
Operate the system and check for any
leakage.
2-8-17
