TM 55-3810-229-14/N
TM 55-3810-229-14/NAVFAC P-941
Figure 4-4. Placement of sleeper shoring under forward axles of MT-250 and MT-300 cranes.
c. Place two stacks of sleeper shoring under the aft
needed, 3/4-inch plywood on top of shoring to insure that
shoring is as close as possible to the axles. Secure the
axles (fig 4-5). Each stack will consist of six pieces of
sleeper shoring in place with CGU-1/B cargo straps.
96- x 12- x 2-inch lumber (or equivalent). Place, as
4-5
