TM 10-3950-672-24-2
If previously removed, install the alignment pin until it
bottoms.
Caution: The gear will be permanently distorted if
over-heated. The oven temperature should never
exceed 177C [350F].
Heat the crankshaft gear in a preheated oven for 45
minutes at 148C [300F].
Apply a thin coating of lubricant to the nose of the
crankshaft.
Warning: Wear
protective
gloves
to
prevent
personal injury.
Install the hot gear up to the crankshaft shoulder with
the timing mark out.
5-296