TM 10-3950-672-24-2
Part or Assembly
Ref. Point
mm
in
Perform Step B of the valve set procedure with Cylinder Number 1 at TDC plus 360 degrees (timing pin will not
engage).
Mark the crankshaft and front cover. Rotate the crankshaft one full turn.
Step B - Four Cylinder
43 N
m
[32 ft-lb]
sequence
Cylinder Block - Group 1 Specifications
Cylinder Block
De-glaze the cylinder bore with a medium (120) grit flex-hone. The crosshatch should be at 15 to 25 degrees with
the top of the cylinder block.
5-353