TM 5-3810-207-20/TO 36C23-3-37-12
Figure 173. Steering tie rod assembly, removal and installation.
Section II. WHEELS, TIRES, AND SHOCK ABSORBERS
The carrier is equipped with eleven 12:00 x 20, 14-
ply rubber tires, eight on the rear, two on the front, and
one spare. All wheels and tires on the carrier are
interchangeable and can be mounted in any position on
the axle. All studs and nuts are marked right or left and
must be installed accordingly on the proper side of the
carrier. The carrier has shock absorbers mounted on
the front axle of the carrier frame.
Removal. Remove the front wheel as
instructed on figure 174.
Cleaning, Inspection, and Repair.
Clean the wheel assembly with an
approved cleaning solvent.
Inspect the wheel assembly for bends,
damage. Replace or repair defective
Installation. Install the front wheel as
illustrated on figure 174.