body with screws (6).
(3) Install check valve (2) and plug and ring (1).
e.Installation. Refer to TM 5-3810-295-12 and in-
(2) Install relief valve (5), directional spool (4) and
spool cap (3).
stall control valve as described.
Section V. REPAIR OF HYDRAULIC RESERVOIR TANK
into a suitable sized container.
(2) Remove hose clamps above the reservoir too]
Removal. Refer to figure 20-6 and remove the hy-
draulic reservoir tank as follows:
(1) Drain all fluid from the hydraulic reservoir