ADHESIVES AND SEALANTS
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause
lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety goggles and
use product in a well-ventilated area away from open flame. If ingested, keep individual calm
and seek medical attention. DO NOT induce vomiting. If contact with skin or eyes is made,
flush thoroughly with water. Dispose of cleanup rags IAW local policy and ordinances.
Failure to follow this warning may cause injury to personnel.
If removed, apply adhesive to cab walls and install eight insulation pads.
If removed, install right console panel (WP 0066).
If removed, install floormats (Figure 6, Items 1 and 5). Apply adhesive to mating surfaces and install floormat
(Figure 6, Item 4), two washers (Figure 6, Item 2), and wingnuts (Figure 6, Item 3) to cab floor.
Figure 6. Floormats Installation.