include a ground oiling hand pump and ground oiling hose and quick connect fitting. A waste
fuel drip tank drain hose and quick connect fitting is also provided.
The special tools include the following:
Various hex keys
Grease gun with flex hose and fitting
Check valve extractor tool
Piston ring pliers
Wood pile tongs
Steel bar with hickey (5-foot (1.5 m))
Cheater bar (36 x 2-inch (91 x 5 cm))
Ten-pound (4.5 kg) sledge hammer
Two-pound (0.9 kg) hammer
12-inch (30.5 cm) and 18-inch (46 cm) adjustable wrenches
1-5/16-inch combination wrench
1-1/8-inch combination wrench
1-5/16-inch box end wrench
1-1/8-inch box end wrench
Two-inch (5 cm) wood level
Pulley with 15-inch (38 cm) anchor bungee
36-inch (91 cm) peavey
The consumable materials include ten 14-oz. (400g) tubes of MIL-G-10924 grease, 1-quart (1 l)
of MIL-L-2105 oil, 1/3-oz. (10 ml) of Loctite 272, and Teflon tape.
The seal kits include a fuel pump seal kit, throttle valve (needle block) seal kit, and oil pump seal
kit. The spare filters include spare inline fuel filters, fuel filter element for the fuel filter assembly,
and fuel/oil tank suction strainer assemblies.
Various spare parts are also included in the tool boxes. Refer to Component End Item Section
at the end of this Appendix for a complete listing of the spare parts.
H-18 Change 1