TM 5-3810-307-24-1-1
WINDSHIELD WIPER/WASHER SWITCH
Removal
a.
Ensure battery disconnect switch is in OFF position.
b.
Disconnect electrical connector for windshield wiper/washer switch (4, Figure 2-14-9).
c.
Loosen set screw and remove knob (1) from switch (4).
d.
Remove nut (2), washer (3), and windshield wiper/washer switch (4) from dash panel.
Installation
a.
Position windshield wiper/washer switch (4, Figure 2-14-9) in dash panel, and secure with washer (3) and nut
(2).
b.
Install knob (1) on windshield wiper/washer switch (4) and tighten set screw.
c.
Connect electrical connector for windshield wiper/washer switch (4).
LEGEND
1. Knob, switch
3. Washer
2. Retaining nut
4. Wiper/washer switch
2-14-22