TM 10-1670-251-12&P
(3)
Fasten rope snaphook (4) onto rope
(6) to form a loop around riser (5).
(4)
Insert safety pin (7) in rope snaphook
(4).
(5)
Hook rope (6) onto safety stop (8) of
governor (9).
(6)
Pull down on riser (5) and open
canopy release (10). Allow body
weight to transfer to one riser.
(7)
Pull down on remaining riser (11) and
open canopy release (12).
(8)
Gradually transfer body weight to the
governor (9).
NOTE
Keep rope taut to prevent involuntary
lowering.
(9)
When position is stabilized, release
rope (6) from safety stop (8).
(10)
Slowly allow rope (6) to feed through
governor (9) and begin descent.
2-32
