TM 10-1670-251-12&P
3-1.
Common Tools and Equipment . For authorized
common tools and equipment, refer to the Modified
Table
of
Organization
and
Equipment
(MTOE)
applicable to your unit and Appendix B, Section III of
this manual.
3-2.
Special Tools, TMDE and Support Equipment .
For a listing of special tools, TMDE, and support
equipment authorized for use on this equipment, refer to
the Repair Parts and Special Tools List, Appendix C,
and the maintenance allocation chart (MAC), appendix
B of this manual.
3-3.
Repair Parts. Repair parts are listed and
illustrated in Appendix C of this manual.
Section II. SERVICE UPON RECEIPT
Paragraph
Page
3-4
Initial Receipt .................................
3-2
3-4.
Initial Receipt. The following describes the
procedures for processing lowering device upon initial
receipt..
a
General Procedures for the Lowering Device.
When air delivery equipment is initially procured from a
supply source and issued to a using unit, the item(s) will
be unpacked from the shipping container(s) and
inspected by qualified personnel. The inspection
performed will be a technical/rigger-type which will be
conducted as outlined In paragraph 3-8. Upon
Completion of the inspection, the
3-2
