TM 10-1670-251-12&P
pen using black or blue Ink may be
used for marking on labels only.
Original stenciled data or marking that
becomes faded, illegible, obliterated,
or
are
removed
as
a
result
of
performing a repair procedure will be
remarked with a ballpoint pen, felt tip
marker, or restenciled. All marking or
restenciling will be done on, or as near
as possible to, the original location
and should conform to the original
lettering type and size.
a.
Marking. Using marking devices, such as
ballpoint pen or felt tip marker, mark on, or as near as
possible to, original location and conform to original
lettering type and size.
b.
Restenciling. Proceed as follows:
(1) Cut oiled stencilboard to original lettering
type and size of data to be restenciled.
(2) Place cut stencilboard over, or as near as
possible
to,
original
marking
to
be
restenciled.
3-17