SECTION I. REPAIR PARTS; TOOLS; SPECIAL TOOLS

TM-10-1670-298-20P Container Delivery System A-7A Cargo Sling Manual
Page Navigation
14

TM 10-1670-298-20&P PAGE 2.35 Main Body Assembly ..................................................................................... 2-78 2.36 Connector Pin Assembly ............................................................................... 2-80 2.37 Connector Strap, 60- and 120-Inches (152.400 cm and 304.800 cm) Long .... 2-81 Section V Preparation for Storage and Shipment........................................................... 2-83 2.38 General ......................................................................................................... 2-83 2.39 General Storage Requirements ..................................................................... 2-83 2.40 Special Instructions for Administrative Storage.............................................. 2-83 2.41 Special Instructions for Administrative Storage of Airdrop Equipment............ 2-84 2.42 Shipment Between Maintenance Activities .................................................... 2-84 2.43 Other Shipment Requirements ...................................................................... 2-84 SECTION I. REPAIR PARTS; TOOLS; SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE); AND SPECIAL EQUIPMENT 2.1 COMMON TOOLS AND EQUIPMENT. For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE), CTA 50-970, or CTA 8-100, as applicable to your unit. 2.2 SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT. No special tools, TMDE, or support equipment is required for the maintenance of this equipment. 2.3 REPAIR PARTS. Repair parts are listed and illustrated in Appendix C of this manual. SECTION II. SERVICE UPON RECEIPT 2.4 SERVICE UPON RECEIPT OF MATERIAL. a. General. When airdrop equipment is initially received from a supply source and issued to a using unit, the Items will be unpacked from the shipping containers and inspected by a qualified parachute rigger. The Inspection performed will be a technical/rigger-type inspection which will be conducted as authorized in paragraph 2.9. Upon completion of the inspection, the items will be tagged as prescribed in DA Pam 738-751. Serviceable equipment may then be entered either into storage or into use in airdrop operations, as applicable An unserviceable item will be held and reported in accordance with DA Pam 738-750/MCO 4855.10. 2-2

Privacy Statement
Press Release
Contact