TM 10-1670-298-20&P
2.35
MAIN BODY ASSEMBLY.
This task covers:
a.
Inspect b.
Repair c.
Replace
INITIAL SETUP
Tools
References
Mallet, Rubber
Paragraph 2.9
(Appendix B, Section III, Item 2)
Materials/Parts
Fin assembly (Appendix C)
Main body assembly (Appendix C)
INSPECT
Conduct a technical/rigger-type inspection in accordance with the Instructions contained in paragraph 2.9. Special
attention should be given to the fin assembly.
REPAIR
NOTE
Repair of the main body assembly consists of replacing a defective fin assembly (Figure 2-38).
a. Remove one of the pins securing the parachute pan to the main body.
b. Using rubber mallet, drive fin assembly from slot.
2-78
