1 Nut (3)
16 Washer
2Washer (3)
17 Bushing
3 Stud (3)
18 Stud
4 Bolt 2)
19 Washer
5 Washer 12)
20 Field coil
6 Head
21 Frame
7 Wick
22 Armature
8 Washer
23 Key
9 Brush set
24 Washer
10 Plate
25 Screw
11 Screw
26 Washer
12 Washer
27 Bearing
13 Nut (2)
28 Drive
14 Washer
29 Bearing
15 Washer
30 Housing
Figure 3-8. Starter, exploded view.
c. Cleaning, Inspection, and Repair.
CAUTION
(1) Use cloth lightly dampened in an approved
Always blow dust particles off commutator
cleaning solvent to clean armature and field frame.
in the direction away from armature windings
(2) Clean all other parts except brushes in an
approved cleaning solvent.
(4) Inspect armature commutator for
(3) Check size of brushes, if they are less than
roughness, out-of-round, or high mica. If any of
one-half length of new ones or if worn to within
these conditions exist, turn commutator down on a
I / 8-inch of the brush holder, replace them.
lathe and undercut mica 1 / 32 inch. Finish with
3-14
