TM 10-3950-672-10
5-3.9
Setting the Outriggers.
WARNING
The outriggers must be set before any other operation of the crane is attempted, unless lifting
on rubber. Failure to comply could result in injury or death.
a. Position OUTRIGGER control lever (9, Figure 5-1) to DOWN.
b. Position OUTRIGGER SELECTOR switches (21 and 22) to the desired position(s) and hold until the
outriggers are fully extended, tires clear the ground, and the crane is level as indicated by the level
indicator, Figure 5-3.
c. Return OUTRIGGER control lever (9) and OUTRIGGER SELECTION switches (21 and 22) to their neutral
positions.
Figure 5-3. Crane level Indicator
5-3.10 Stowing the Outriggers.
a. Position OUTRIGGER control lever (9, Figure 5-1) to UP.
b. Position OUTRIGGER SELECTION switches (21 and 22) to the desired position(s) and hold until the
outriggers are fully retracted.
c. Return OUTRIGGER control lever (9) and OUTRIGGER SELECTION switches (21 and 22) to their neutral
positions.
5-30
