TM 10-3950-672-10
CAUTION
Should the crane become mired down, use a tow truck or tractor to free the vehicle. Severe
damage to the transmission or axles may occur if the operator attempts to free the crane
unassisted.
CAUTION
If the crane is mired down, use the lugs to pull or tow. There are two lift/tow lugs available on
each end of the crane. When using these lugs, always tow or pull using both lugs.
5-3.5 Driving the Crane. The following operating conditions should be strictly adhered to before moving the crane.
Procedures for accomplishing the following can be found in the various Sections of this manual.
a. Ensure the boom is fully retracted. Refer to paragraph 5-3.15.
b. Swing the boom over-the-front and lower the boom to just above horizontal. Refer to paragraph 5-3.11.
c. Remove the hook block and stow securely before traveling or ensure the hook block is properly secured to
the tie down provided for that purpose. Refer to illustration of crane on front cover.
d. Ensure the outriggers are fully retracted. Refer to paragraph 5-3.10.
e. Apply foot brake pedal (8, Figure 5-1) then release parking brake by pulling up on lever (18).
f. Using 1-2-D-N-R lever (11, Figure 5-1), select D (Drive forward) or R (reverse).
g. Release foot brake pedal (8, Figure 5-1) and depress foot throttle pedal (7).
h. Steer crane in a manner similar to that of an automobile.
i. To stop, release foot throttle pedal (7, Figure 5-1) and depress foot brake pedal (8).
5-26
