TM 10-3950-672-10
Table 6-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
26.
CRANE WILL NOT MOVE OR MOVES ERRATICALLY (TRANSMISSION FAILURE).
Step 1.
Low transmission oil level.
a.
Remove dipstick and check transmission oil level. If OK,
do step 2. Refer to PMCS in Section 5.
b.
Fill to proper level.
Step 2.
Transmission shift lever at N-Neutral.
a.
Check position of transmission shift lever.
Step 3.
Defective transmission.
a.
Contact Organizational Maintenance.
27.
TRANSMISSION OIL TEMPERATURE ABOVE NORMAL.
Step 1.
Low transmission oil level.
a.
Remove dipstick and check oil level. Refer to PMCS in
b.
Fill to proper level.
Step 2.
Defective transmission.
a.
Contact Organizational Maintenance.
28.
BRAKES ARE POOR OR DO NOT APPLY.
Step 1.
Low master brake cylinder fluid level.
a.
Check brake fluid level in master cylinder. Refer to PMCS
in Section 5. If OK, Contact Organizational Maintenance.
b.
Service master brake cylinder.
6-23
