TM 10-3950-672-10
Table 6-1. Operator Troubleshooting (continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 5.
Hydraulic system failure.
a.
Contact Organizational Maintenance.
37.
TELESCOPE CYLINDER WILL NOT EXTEND OR RETRACT.
Step 1.
Low hydraulic oil level.
a.
Check hydraulic oil level. Refer to PMCS in Section 5. If
OK, do step 2.
b.
Service hydraulic reservoir.
Step 2.
Excessive load.
a.
Reduce load.
Step 3.
Hydraulic system failure.
a.
Contact Organizational Maintenance.
38.
HOIST WILL NOT RAISE LOAD.
Step 1.
Load capacity exceeded.
a.
Reduce load.
Step 2.
Low hydraulic oil.
a.
Check hydraulic oil level. Refer to PMCS in Section 5. If
OK, do step 3.
b.
Service hydraulic reservoir.
Step 3.
Hydraulic system failure.
a.
Contact Organizational Maintenance.
6-27
