ME 3810(201-35/3-17(4)
Figure 3-17. turbocharger details (sheet 4 of 10).
ME 3810-201-35/3-17(6)
Figure 3-17. Turbocharger details (sheet 6 of 10).
brush or steel blade scraper for this purpose.
NOTE
Make sure all wheel blades are
thoroughly cleaned. Deposits left on
the blades will affect balance.
e. Inspection and Repair. Inspect shaft and wheel
(1) Inspect bearing journals for excessive
scratches and wear. Minor scratches may be tolerated.
Shaft diameter must be 0.6862 inch.
Figure 3-17. Turbocharger details (sheet 5 of 10).
AGO 20051A
3-23