ME 3810-201-35/3-33
1
War
13
Bolt
25
Being
2
Screw
14
Elbow
26
Lack
3
Elbow
15
Gasket
27
Retainer
4
Plug
16
Gasket
28
Screw
5
Gasket
17
et
29
Washer
6
Nut
18
Cover
30
Seal
7
Impeller
19
Washer
3l
Bolt
8
Seal
20
Bolt
32
Nut
9
Bolt
21
Bolt
33
Housing
10
Elbow
22
Bearing
34
Slinger
11
Seal
23
Gear
12
Screw
24
Shaft
Figure 3-33. Water pump , for engine model D333TA, exploded view
a. Removal and Installation Remove and install
counterclockwise while the impeller
oil cooler with water pump as a unit (para 3-26).
(7) is removed by turning clockwise.
b. Disassembly and Reassembly.
(2) Reassemble
in
reverse
order
of
(1) Refer to figure 3-34 and remove the oil
Disassembly.
cooler cover and elbows as required.
(2) Refer to figure 3-35 and remove core,
NOTE
hose and elbows as required.
During reassembly maintain 0.005 to
(3) Reassemble by reversing procedures
0.015
inch
clearance
between
used in disassembly.
impeller and body. Torque impeller
nut to 055 ft-lb.
c. Cleaning, inspection, and Repair.
c. Cleaning, inspection, and Repair. Refer to
NOTE
paragraph --25b above and clean, inspect, and repair
If oil cooler core has excessive scale
this water pump in a similar manner.
deposits, the cooling system must be
cleaned.
3-27. Oil Cooler for Engine Model l D333TA
AGO 20051A
3-42
