Figure 6-4. Chain tightener, exploded view.
Section II. SHOVEL DIPPER AND HANDLE
6-6. General
6-7. Shovel Dipper
a. Removal and Disassembly.
The crane-shovel is provided with a combination cast
and welded dipper of 2 cubic yards capacity. The dipper
(1) Remove shovel dipper and disassembly (TM 5-
teeth are of forged steel and easily replaced. The handle
3810-201-12).
is attached to dipper bail (padlock) and dipper, with
handle points operating through saddle blocks and over
(2) Refer to figure 6-5 and remove sleeve bearings
spur gears on the boom shipper shaft.
(28, 29, and 49) as required, from shell (26).
AGO 20051A
6-5
