Figure 1-1. Crane-shovel basic unit, right 3/4 rear view, and shipping dimensions.
position on engine will be described in relation to
major identification plates which this paragraph locates
radiator as front end, or flywheel as the rear end. As an
and describes. Data contained on them is listed in b
example, on Model 687C-18-ES the starting motor is at
below.
rear on left side, the generator at front on right side. On
(1) Corps of engineers identification plate.
Model D333TA, the alternator is. at front on left side,
This plate is mounted at right of the transportation data
and starting motor at rear on right side. The cylinders
plate ((7) below). It specifies the class, nomenclature,
are numbered from front to rear.
stock number, model number, manufacturer's name.
and serial number.
1-4. Identification and Tabulated Data
(2) Manufacture' identification plate. This
s
a. Identification. The crane-shovel basic unit has seven
plate is mounted on right front of operator compartment
1-2
