NOTE
THE RETAINER (21) IS A PRESS FIT, BUT IS EASILY REMOVED BY USING A 3/8-16 (NC) BOLT
OF SUITABLE LENGTH AND A SPACER.
NOTE
AT REASSEMBLY, COAT PREFORMED PACKING OR SEALS WITH LIQUID SOAP TO EASE
INSTALLATION.
Figure 3-38. Oil filters, removal, disassembly, reassembly, and installation
for engine Model D333TA (sheet 2 of 2).
(b) Remove tube from bushing by
(1) Removal.
turning in a counterclockwise direction.
(a) Refer to figure 3-40 and remove
(c) Remove bushing from block.
dipstick from tube.
(2) Installation.
Install by reversing
(b) Remove two capscrews and
procedure used in (1) above.
lockwasher, then remove the tube from oil pan.
b.
On Engine Model DSSSTA.
3-52
