Figure 3-97. Planetary clutch band and brake band, removal and installation.
(3) Repair by replacing defective mounting
(1) Remove cable from drum (para 3-39).
hardware, defective springs, and clutch or brake bands
(2) Remove the four capscrews (fig. 3-98)
when lining is worn to within 1/16 inch of rivet heads.
and washers from lagging.
(3) Refer to figure 3-99 and remove sleeve
3-124. Drum Legging and Sleeve
Nut
(Shear
nut (shear washer) by use of special tool (table 3-1).
Washer)
(4) Secure lifting device to lagging halves,
a. Removal and Installation.
3-105
