CHAPTER 9
CARRIER CAB AND FENDER REPAIR INSTRUCTIONS
Section I. CARRIER INSTRUMENT PANEL
(6) Remove the instrument panel from the
290.
General
panel mounting as instructed on figure 81.
The carrier instrument panel is mounted on the cab
292.
Carrier
Instrument
Panel
Cleaning,
dashboard. Located on the panel are the starter, light,
and ignition switches; the temperature and oil pressure
Inspection, and Repair
warning lights; the high beam indicator and dashboard
lights; the choke control, primer, and windshield wiper
a. Cleaning. Clean the instrument panel with an
knobs; the generator indicator, fuel, oil pressure, air
approved cleaning solvent.
pressure, and temperature gages; and the speedometer.
b. Inspection and Repair. Inspect the instrument
panel for cracks, bends, breaks, or other damage.
291.
Carrier Instrument Panel Removal
Repair or replace a damaged instrument panel as
necessary.
a. Removal.
(1) Remove the starter, light, and ignition
293.
Carrier Instrument Installation
switches from the instrument panel (TM 5-
a. Install the carrier instrument panel on the panel
3810-207-20).
(2) Remove the dashboard, high beam
mounting in the reverse of the instructions on figure 81.
indicator, oil pressure warning and
b. Install the speedometer on the instrument panel
temperature warning lights from the
(TM 5-3810-207-20).
instrument panel (TM 5-3810-207-20).
c. Install the generator indicator, fuel, oil pressure,
(3) Remove the choke control, primer, and
air pressure, and temperature gage on the instrument
windshield wiper knobs from the
panel (TM 5-3810-207-20).
instrument panel (TM 5-3810-207-20).
d. Install the choke control, primer, and windshield
(4) Remove the generator indicator, fuel, oil
wiper knobs on the instrument panel (TM 5-3810-207-
pressure, air pressure, and temperature
20).
gages from the instrument panel (TM 5-
e. Install the dashboard, high beam indicator, oil
3810-207-20).
pressure warning, and temperature warning lights on the
(5) Remove the speedometer from the
instrument panel (TM 5-3810-207-20).
instrument panel (TM 5-3810-207-20).
f. Install the starter, ignition, and light switches on
the instrument panel (TM 5-3810207-20).
Section II. CARRIER CAB VENTILATORS
front and left side. They provide a means of fresh air
294.
General
entry to the cab.
The carrier cab ventilators are located on the cab
TAGO 5030A
137
