Figure 284. Crate horizontal reversing shaft assembly.
Section LXXVII. CRANE VERTICAL REVERSING SHAFT ASSEMBLY
assembly as instructed on figure 285.
605. General
The crane vertical reversing shaft assembly is
b. Disassembly. Disassemble the vertical reversing
driven by the horizontal reversing shaft assembly
shaft assembly in numerical sequence as shown on
through beveled gears. A machined gear on the vertical
reversing shaft meshes with a gear on the vertical swing
shaft
607. Crane Vertical Reversing Shaft
606. Crane Vertical Reversing Shaft
Assembly Cleaning, Inspection, and
Assembly Removal and Disassembly
Repair
a. Removal.
a.
Cleaning. Clean all parts in an approved
(1)
Remove the crane cab assembly and
cleaning solvent and dry thoroughly.
the hoist drum shaft (paras. 296 and
b. Inspection and Repair. Inspect all parts for
(2)
Remove the horizontal reversing shaft
excessive wear or damage. Replace or repair defective
assembly (para. 602).
parts.
(3)
Remove the vertical reversing shaft
AGO 6819A
316
