(2) Crane. The crane is powered by a 6-cylindei
of the fuel tank. It shows nominal weight and dimensions
for locating center of gravity.
Cummins Model JN-6 naturally aspirated diesel engine.
(4) Carrier attachment data plate (model 2385 only).
It is mounted at the rear of the revolving upper structure.
Located on the carrier main frame to the fuel tank next to
The cab provides an enclosure for the operator, controls,
the information data plate. It shows size, capacity and
and instruments. The upper structure revolves on rollers
location for attaching lifting slings. It also shows tiedown
around a center pin. The crane cab has a personnel
locations.
heater for crew comfort.
(3) Carrier. The crane carrier is a heavy-duty
(5) Crane control lever instruction plate. Located
4-wheel drive unit with both front and rear steerable
inside the cab to the right of the operators controls. It
wheels.
The carrier is powered by an 8-cylinder
gives instructions on the use of levers, pedals, and other
Cummins Model V8-265 naturally aspirated diesel
controls.
(6) Crane lifting capacities, boom angle, and height
engine. The carrier is equipped with hydraulic operated
instruction plate. Located to operator's left on rear of
outriggers mounted on each side of the carrier frame to
stabilize the equipment when in use. The carrier is
door. It shows lifting capacities of the crane at different
equipped with a hydraulically operated utility blade for
radii and boom lengths, both with and without outriggers.
clearing a path for the crane to travel and to clear
(7) Power line caution plates. There are two power
suitable operating areas for the outriggers to be
line caution plates. One located in each of the operator's
positioned. The carrier cab is equipped with a personnel
cabs, to the right of the operator's controls. It cautions
heater.
the operator to keep boom away from the power lines.
b. Terms. In this manual, the terms "left" and
(8) Brake caution plate (model 2380 only).
"right" are used with respect to the carrier operator's
Located inside of the operator's cab of the carrier.
seat. "Front" is the end of the crane where the boom is
It gives instructions on the use of the brakes.
mounted. "Rear" is the end of the crane which contains
(9) Boom caution plate. Located on the outside of
the engine.
the back of the carrier operator's cab.
It gives
1-7. Difference in Models
instructions on supporting the boom with cables when
traveling.
This manual covers the American Hoist and Derrick
(10) Front axle instruction plate (,model 2380 only).
Models 2380 and 2385 Rough Terrain Crane. Where
Located on the floor, beside the shift lever. It shows the
differences exist, each model is covered separately in
position of the declutch control.
the applicable portions of this manual.
(11) Boom hoist jaw clutch and ratchet instruction
1-8. Identification and Tabulated Data
plate. Located in the crane operator's cab, be-hind and
a. Identification. The models 2380 and 2385 cranes
to the right of the operator's seat. It shows shifting
have 16 each identification plates. Plates with different
position of the jaw clutch lever and the safety pawl (boom
locations and data are indicated by model no. The
hoist ratchet) control lever.
information on these plates is listed below.
(12) Engine clutch instruction plate (model 2380
(1) Corps of Engineers identification plate.
only). Located in the crane operator's cab, behind and to
Located on the left side of the revolving super-structure
the right of the operator's seat. It shows shifting position
frame of the crane. It gives the nomenclature, Federal
of the engine clutch lever.
stock number, manufacturer, model, serial number, date
(13) Antirotation device instruction plate (model
of manufacturer, contract number, and USA registration
2380 only). Located on the rear of revolving super-
number. It also gives the make, model and serial
structure frame of the crane. It gives instructions on the
number of the crane engine.
(2) Transportation data instruction plates.
use of the antirotation device.
Carrier diesel fuel tank capacity plate
(a) Crane. Located on the left side of the crane
(14)
(model 2380 only). Located on the rear of the carrier
revolving superstructure for the combined crane and
main frame near the fuel tank filler. It gives capacity of
carrier. It gives data on the length, height, width, and
the fuel tank.
weight of the crane. It also shows the lifting sling
Crane diesel fuel tank capacity plate (model
(15)
positions.
(b) Carrier (model 2380 only). Located on the
2385 only). Located just above the rear walkway at the
left side of the carrier main frame. It gives data on the
right rear corner of the crane cab near the fuel tank filler.
length, width, height, and weight of the carrier.
It gives the capacity of the fuel tank.
(3) Carrier information data plate (model 2385 only).
Ring gear data plate. Located on top of
(16)
Located on the carrier main frame to the rear
one of the ring gear spokes on the carrier. It shows
nominal weight of the ring gear.
1-6
