Figure 2-24. Outrigger floats in in operating position or stabilizer wedges, installation.
(3) Position the outriggers in working position by
(2) Place tractor protection brake control (fig. 2-16,
operating their respective controls.
(17)), in EMERGENCY position and charge system to
120 psi gage pressure; then, move tractor protection
brake control to RELEASE position. Make a pedal brake
2-15. Operating the Crane Carrier
application; hold for 4 seconds, release brake pedal and
(Model 2385)
allow the air pressure to build up to 120 psi once more.
This procedure is necessary to insure positive release of
a. Operating the Crane Carrier Over the Road.
the park brakes.
(1) Start the carrier engine (para 2-11) and allow
brake air pressure to reach 120 psi.
2-38
