c. Steering Selector Control Valve.
(b) Inspect all parts for cracks, scoring,
(1) Removal. Remove the steering selector
corrosion, or other defects.
(c) Replace all gaskets, O-rings and
control valve (TM 5-3810-232-12).
damaged or defective parts.
(2) Disassembly.
Disassemble selector
(4) Reassembly.
Reassemble selector
control valve in numerical sequence as illustrated in 5-
control valve in reverse of the numerical sequence
illustrated in figure 5-33.
(3) Cleaning, inspection and repair.
(5) Installation. Install steering selector
(a) Clean all metal parts with an
control valve (TM 5-3810-232-12).
approved cleaning solvent and dry thoroughly.
5-70
