TM 5-3810-289-12
repair or replacement of worn or unservice able
used with. The letter is representative of columns A
elements (items) using original manufacturing
through K on the MAC.
b. Maintenance Level. This column shows the
tolerances and specifications, and subsequent
reassembly of the item.
lowest level of maintenance authorized to use the special
tool or test equipment.
d. Tools and Equipment, Column (4). This
c. Nomenclature. This column lists the name
column is provided for referencing by code the special
or identification of the tool or test equipment.
d. Tool Number.
This column lists the
tools and test equipment (sec III) required to perform the
maintenance functions (sec II).
manufacturer's code and part number, or Federal stock
e. Remarks, Column (5). This column is
number of tools and test equipment.
provided for referencing by code the remarks (sec IV)
pertinent to the maintenance functions
B-4.
Explanation of Columns in Section IV
a. Reference Code. This column consists of
B-3.
Explanation of Columns in Section
two letters separated by a dash, both of which are
a. Reference Code. This column consists of a
references to section II. The first letter references
number and a letter separated by a dash. The number
column (5) and the second letter references a
references the T&TE requirements column on the MAC.
maintenance function, column (3), A through K.
The letter represents the specific maintenance function
b. Remarks. This column lists information
the item is to be
pertinent to the maintenance function being performed,
as indicated on the MAC, section II.
B-2
