TM 5-3810-293-14&P-1
Table Z-E-2.
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
CRANE
Q-QUARTERLY
S-SEMIANNUALLY
A-ANNUALLY
B-BIENNIALLY
H-HOURS
M-MILES
ITEM
INTERVAL
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
NO
PROCEDURE:CHECK FOR AND HAVE REPAIRED,
READY/AVAILABLE IF:
Q
S
A
B
H
NI
FILLED, OR ADJUSTED AS NEEDED
NOTE
Perform operator/crew PMCS prior to or in conjuction with
organizational PMCS.
1.
Cooling System
*
a. Inspect hoses and lines for damage, leaks, restrictions, and deterioration.
*
b. Use hydrometer to measure coolant system freezing point. Add antifreeze as
required to protect coolant system to lowest expected ambient temperature.
c. Inspect radiator for leaks and cleanliness.
2.
Fuel System
*
a. Check for leaks.
160
b. Change filters after 160 engine hours..
*
c. Drain sediment and water from fuel tank.
3.
Air Cleaner
*
Disassemble, clean, replace filter and reassemble.
4.
Brakes
*
Check for proper operation and adjust or replace linings as required.
5.
Engine Clutch
*
a. Check for proper operation, adjust if required.
*
b. Check master cylinder hydraulic fluid level
6.
Engine
160
a. Change oil and filters after 160 engine hours.
*
b. Adjust or replace belts as required.
*
c. Clean crankcase breather.
d.Inspect and clean blower screen.
3-2-52