TM 5-3810-293-20P
D-
Depot is the lowest level that can do
the item by means of its engineering drawings,
specifications standards, and inspection requirements to
complete repair of the item.
L-
identify an item or range of items.
Specialized repair activity is the lowest level
that can do complete repair of the item.
NOTE: When you use a NSN to requisition an item, the
Z-
Nonreparable. No repair is authorized.
item you receive may have a different part number form
B-
No repair is authorized. (No parts or special
the part ordered.
tools are authorized for the maintenance of a
"B" coded item). However, the item may be
e. DESCRIPTION AND USABLE ON CODE
reconditioned by adjusting, lubrication, etc.,
(UOC) (Column (5)). This column includes the following
at the user level.
information:
(1) The Federal item name and, when
(3) Recoverability Code. Recoverability
required, a minimum description to identify the item.
codes are assigned to items to indicate the disposition
(2) Physical security classification. Not
action on unserviceable items. The recoverability code is
applicable
entered in the fifth position of the SMR Code as follows:
(3) Items that are included in kits and sets
are listed below the name of the kit or set on Figure KIT.
Code
Application/Explanation
(4) Spare/repair parts that make up and
Z-
Nonreparable item. When unserviceable,
assembled item are listed immediately following the
condemn and dispose of the item at the level
assembled item line entry.
of maintenance shown in 3d position of SMR
(5) Part numbers for bulk materials are
Code.
referenced in this column in the line item entry for the
O-
Reparable item.
When uneconomically
item to be manufactured/fabricated.
reparable, condemn and dispose of the item
(6) When the item is not used with all
at unit maintenance or aviation unit level.
serial numbers of the same model, the effective serial
F-
Reparable item.
When uneconomically
numbers are shown on the last line(s) of the description
reparable, condemn and dispose of the item
(before UOC). Not applicable.
at the intermediate direct support or aviation
(7) The usable on code, when applicable
intermediate level.
(see paragraph 5, Special information)
H-
Reparable item. When uneconomically
(8) In the Special Tools List section, the
reparable, condemn and dispose of the item
basis of issue (BOI) appears as the last line(s) in the
at the intermediate general support level.
entry for each special tool, special TMDE, and other
D-
Reparable item. When beyond lower level
special support equipment. When density of equipments
repair
capability,
return
to
depot.
supported exceeds density spread indicated in the basis
Condemnation and disposal of item not
of issue, the total authorization is increased
authorized below depot level.
proportionately.
L-
Reparable item.
Condemnation and
(9) The statement "END OF FIGURE"
disposal of item not authorized below
appears just below the last item description in Column 5
specialized repair activity (SRA).
for a given figure in both Section II and Section III.
A-
Item
requires
special
handling
or
condemnation procedures because of
QTY (Column (6)). The QTY (quantity per
f.
specific reasons (e.g., precious metal
figure column) indicates the quantity of the item used in
content, high dollar value, critical material, or
the breakout shown on the illustration figure, which is
hazardous material). Refer to appropriate
prepared for a functional group, subfunctional group, or
manuals/directives for specific instructions.
an assembly. A "V" appearing in this column in lieu of a
quantity indicates that the quantity is variable and the
c. FSCM (Column (3)). The Federal Supply
quantity may vary from application to application.
Code for Manufacturer (FSCM) is a 5-digit numeric code
which is used to identify the manufacturer, distributor, or
4.
Government agency, etc., that supplies the item.
NATIONAL
STOCK
NUMBER
(NSN)
a.
d. PART NUMBER (Column (4)). Indicates
INDEX.
the primary number used by the manufacturer
(individual, company, firm, corporation, or Government
activity), which controls the design and characteristics of
3
